Foam wiper ball to wipe out drill pipe or tubing string clean from cement, after cement jobs in drilling operations.
Merit manufactures every single foam wiper balls with various sizes and specifications according to desired qualities.Thus we listen you to produce what your cementing job requires exactly. A well experienced crew awaits you in behind of the lab.
We deliver foam wiper balls all over the world from arctic to desert plants just in time after production. Air express shipping available all days of the weeks. Sea and road options as well.
Published data sheet link here. In addition our products are MSDS certified.
Finally to say 7/24 we are open to reply your enquiries. Please take not our email address below.
Our wiper balls are made of natural rubber and can be used in a temperature range of 40°F (4°C) to 302°F (150°C). The ball has a parting stretch of 380 to 440%, which means it can pass through small restrictions without being damaged.
Please feel free for RFQ on foam cement wipers Merit Automotive foam wipers from us.
The foam wiper balls are designed to wipe drill pipe or tubing string clean of cement, fluids or debris and can be used to separate fluids.
These wiper balls are made of natural rubber and can be used in a temperature range of 40°F (4°C) to 302°F (150°C). The foam wiper ball is made of natural rubber of open cell design. The ball has a parting stretch of 380% to 440%, which means it can pass through small restrictions without being damaged. It easily passes through internal upset restrictions, such as mechanical setting tools, diverters, and liner running tools, and multiple balls can be pumped, if necessary.
The foam wiping balls are not recommended to use on cementing work where the ball must continuously pass through extremely tight restrictions repeatedly.
The wiper ball can be loaded into drillpipe or tubing connections. It easily passes through internal upset restrictions such as mechanical setting tools, diverters, and liner running tools, and multiple balls can be pumped if necessary. Foam wipe out balls have been used with all types of drilling and displacement fluids.
By the way foam wiper out balls all provide mechanical wiping action.
Merit’s wiping out foam balls are designed to wipe drill pipe or tubing string clean of cement, fluids, or debris and can be used to separate fluids. Merit wipe out foam balls are made of natural rubber of open cell design. They can pass through small restrictions without being damaged, though it is not recommended that they be used if required to repeatedly pass through extremely tight restrictions. Balls can be used with most types of drilling and displacement fluids.
Case story:
The customer was spending up to three extra hours on trips out of the hole to clean out cement. They wanted to wipe a drill pipe clean after performing a shoe squeeze through 5-in. drillpipe with an 8-1/2-in. bit with three 20/64th nozzles installed. The squeeze was done at 9,200 (2804 m) True Vertical Depth/Measured Depth with a bottom hole circulating temperature of 165°F. A 7-in. foam wiper ball was recommended because it can pass through a 1-in. restriction. e 7-in. foam wiper ball cleaned the drillpipe successfully and passed through the bit with little increase in pump pressure. e customer was very pleased with the wiping action and versatility of Merit’s foam wiper balls.
Measured Depth: MD
True Vertical Depth: TVD
Also available for:
Wiper Ball 2″ Polyurethane for 1.75″ OD
Wiper Ball 2-1/4″ Polyurethane for 2.00″ OD
Wiper Ball 1-3/4″ Polyurethane for 1.50″ OD
7″ wiper foam ball will be used for operations done through 5 7/8” and 6 5/8” DP.
Typical wiping range should be between 5,5” to 2,38”.
7” Foam/Wiper Ball part number is WP10007.
7” Wiper/Foam Ball.
It will be used for operations done through 5 7/8” and 6 5/8” DP.
Cement foam ball oil and gas.
MERIT® is world #1 supplier of foam wiper balls in the energy industry.
The foam wiper ball is designed to wipe drillpipe or tubing string clean of cement, fluids, or debris and can be used to separate fluids. These wiper balls are made of natural rubber of open cell design. The ball has a parting stretch of 380 to 440%, which means it can pass through small restrictions without being damaged. It easily passes through internal upset restrictions, such as mechanical setting tools, diverters, and liner running tools, and multiple balls can be pumped, if necessary.
The foam wiper ball is not recommended to use on cementing work where the ball must continuously pass through extremely tight restrictions repeatedly.
Foam wiper balls cannot be preinstalled into a plug container because the foam ball can be sucked past the plunger prematurely.
Features
* Can efficiently wipe combination drillpipe and tubing strings with various inside diameters.
* Used in wells with a temperature range of 40 to 302°F (4 to150°C).
* The wiper ball can be loaded into drill pipe or tubing connections.
* Foam wiper balls have been used with all types of drilling and displacement fluids.
* Can pass and shred through bit mud nozzle jets, if required. Allows wiping of drill pipe with drill bit on bottom.
* Several ball sizes available from 3 to 14 in. in a variety of selected wiping range intervals.