Wiper Foam Ball for 2 3/8'' - 4'' Pipes In Oilfield

Wiper Foam Ball for 2 3/8” – 4” Pipes

Wiper foam ball for 2 3/8” – 4” pipes is a registered original supply of MERIT.

Wiper foam ball for 2 3/8” – 4” Pipes is used to avoid potential residual cement, fluids or debris, setting and accumulating on the drill pipe’s internal diameter.

Wiper Foam Ball for 2 3/8'' - 4'' Pipes In Oilfield
The genuine Wiper Foam Ball for 2 3/8” – 4” Pipes

General Size Reference in.(mm)

Actual Size in.(mm)
Part No
Typical wiping range in. (mm)
Minimal restriction*** in. (mm)
3.00 (76.10)
3.15 (80)

WP10003

2.5 to 1.10 (63.5 to 27.90)
0.500 (12.7)
4.00 (102.00)
3.94 (100)

WP10004

3.12 to 1.38 (79.20 to 35.10)
0.625 (15.9)
5.00 (127.00)
4.92 (125)

WP10005

4.00 to 1.75 (101.60 to 44.50)
0.750 (19.1)
6.00 (152.40)
5.91 (150)

WP10006

4.75 to 2.00 (120.70 to 50.80)
0.875 (22.20)

7.00 (178.10)

6.89 (175)

WP10007

5.50 to 2.38 (139.70 to 60.50)

1.000 (25.40)

8.00 (203.00)
7.87 (200)

WP10008

7.00 to 3.00 (177.80 to 76.20)
1.375 (34.90)
9.00 (225.00)
8.85 (225)

WP10009

8.00 to 3.20 (203.20 to 81.28)
1.440 (36.58)
10.00 (250.00)
9.84 (250)

WP10010

8.40 to3.51 ( 213.35 to 89.15)
1.500 (38.10)
11.00 (275.00)
10.82 (275)
WP10011
8.75 to 3.75 (222.30 to 95.30)
1.750(44.50)
12.00 (300.00)
11.81 (300)
9.00 to 4.32 (228.60to 109.73)

2.000 (50.80)