Wear Bush (Steel) for Epiroc HB 5800 – P/N 3363088647
Looking for a high-durability wear bush for your Epiroc HB5800 rock breaker?
MERIT supplies a premium OEM-equivalent steel wear bush engineered for maximum strength, precise fit, and long service life under the toughest operating conditions.
🔧 Technical Specifications:
• Compatible Model: Epiroc HB 5800 hydraulic hammer
• Part Number: 3363088647
• Length: 10.24 in
• Diameter: 10.32 in
• Lower Body Diameter: 10.32 in
• Tip Diameter: 7.87 in
• Weight: 96.2 lb
💪 Manufactured from high-grade alloy steel and heat-treated for exceptional wear resistance, this component ensures reliable performance in quarrying, demolition, and mining applications.
For pricing and availability, please contact:
info@meritautomotive.com
| WEAR BUSH LOWER | ATLAS COPCO EPIROC | HB5800, HB 5800 | 3363 0886 47 | 3363088647 |
| WEAR BUSH | ATLAS COPCO EPIROC | HB5800, HB 5800 | 3363 0886 17 | 3363088617 |
| IMPACT RING | ATLAS COPCO EPIROC | HB5800, HB 5800 | 3363 0886 15 | 3363088615 |
Disclaimer: “Epiroc” and the referenced part numbers are used only for identification and compatibility purposes. MERIT is not an authorized dealer, distributor, or representative of Epiroc. All parts offered are MERIT-manufactured OEM-equivalent components, not genuine Epiroc products.
- 3363 0898 50: Accumulator repair kit
- 3361 3290 22: Diaphragm
- 3360 3322 59: Filling screw
- 3360 3144 60: O-ring
- 3361 3350 25: Protective cap
- 3360 3143 64: O-ring
- 3360 3280 46: Back-up ring
- 3363 1034 87: Expansion bolt kit
- 3363 1000 47: Expansion bolt (4 pcs)
- 3363 1000 49: Washer (4 pcs)
- 3361 0315 46: Threaded insert (4 pcs)
3363 1034 11: Lower breaker part kit (DustProtector, steel)
3363 0886 43: Base for wiper
3363 0877 01: Wiper
3363 0886 23: Retainer bar (2 pcs)
3363 0886 21: Bolt (2 pcs for retainer bar, 4 pcs for wear bush)
3362 2604 35: Plug (4 pcs)
3363 0886 15: Impact ring
3363 0886 17: Wear bush
3363 0886 47: Wear bush (steel)
3362 2604 33: Locking bush (6 pcs)
3363 0879 59: O-ring
3315 0381 00: Chisel paste
3363 0889 97: Test gauge
3363 0943 80: Lower breaker part kit (DustProtector, bronze)
3363 0886 43: Base for wiper
3363 0877 01: Wiper
3363 0886 23: Retainer bar (2 pcs)
3363 0886 21: Bolt (2 pcs for retainer bar, 4 pcs for wear bush)
3362 2604 35: Plug (4 pcs)
3363 0886 15: Impact ring
3363 0886 17: Wear bush
3363 0886 41: Wear bush (bronze)
3362 2604 33: Locking bush (6 pcs)
3363 0879 59: O-ring
3315 0381 00: Chisel paste
3363 0889 97: Test gauge
- 3363 0943 79: Lower breaker part kit (HB 5800 with lower wear bush bronze)
- 3363 0886 23: Retainer bar (2 pcs)
- 3363 0886 21: Bolt (2 pcs for retainer bar, 4 pcs for wear bush)
- 3362 2604 35: Plug (4 pcs)
- 3363 0886 15: Impact ring
- 3363 0886 17: Wear bush
- 3363 0886 41: Wear bush (bronze)
- 3363 0886 21: Bolt (4 pcs)
- 3362 2604 33: Locking bush (6 pcs)
- 3363 0879 59: O-ring
- 3315 0381 00: Chisel paste
- 3363 0889 97: Test gauge
- 3363 1034 10: Lower breaker part kit (HB 5800 with lower wear bush steel)
- 3363 0886 23: Retainer bar (2 pcs)
- 3363 0886 21: Bolt (2 pcs for retainer bar, 4 pcs for wear bush)
- 3362 2604 35: Plug (4 pcs)
- 3363 0886 15: Impact ring
- 3363 0886 17: Wear bush
- 3363 0886 47: Wear bush (steel)
- 3363 0886 21: Bolt (4 pcs)
- 3362 2604 33: Locking bush (6 pcs)
- 3363 0879 59: O-ring
- 3315 0381 00: Chisel paste
- 3363 0889 97: Test gauge
- Plastic parts kit:
3363 0878 07: Plastic parts kit
3363 0860 37: Elastic pad
3363 0860 39: Shock absorber (2 pcs)
3363 0860 41: Guide plate (2 pcs)
3362 2652 15: Guide plate (2 pcs)
3362 2626 67: Guide plate (2 pcs)
3363 0933 85: Plate - Tensioning bolt kit:
3363 0943 54: Tensioning bolt kit
3363 0886 11: Tensioning bolt (4 pcs)
3363 0936 49: Washer (4 pcs)
3363 0853 79: Threaded insert (4 pcs)
3363 0943 00: Anti-Seize 120 g
- 3363 0875 91: Seal kit
- 3360 3143 76: O-ring (1 pc)
- 3360 3143 70: O-ring (1 pc)
- 3360 3143 64: O-ring (2 pcs)
- 3360 3280 46: Back-up ring (2 pcs)
- 3360 3144 94: O-ring (2 pcs)
- 3360 4781 71: O-ring (1 pc)
- 3363 0870 85: Back-up ring (1 pc)
- 3363 1104 01: O-ring (1 pc)
- 3361 8504 22: Seal kit (1 pc) [Note: This is a sub-kit?]
- 3361 8462 82: O-ring (2 pcs) [from sub-kit?]
- 3361 8462 81: Back-up ring (2 pcs) [from sub-kit?]
- 3361 8504 22: Seal kit (1 pc) [again?]
- 3361 8462 82: O-ring (2 pcs)
- 3361 8462 81: Back-up ring (2 pcs)
- 3360 4784 26: Threaded plug (1 pc)
- 3360 1751 25: O-ring (1 pc)
- 3363 1034 18: Seal (1 pc)
- 3363 0981 37: Seal (1 pc)
- 3363 0875 92: Seal kit (2 pcs)
- 3363 0877 05: Back-up ring (1 pc) [from seal kit 3363 0875 92?]
- 3363 0877 04: Seal (1 pc) [from seal kit 3363 0875 92?]
- 3361 0319 88: O-ring (1 pc)
- 3362 2675 83: Seal (5 pcs)
- 3362 2675 90: Seal (8 pcs)
- 3360 3144 53: O-ring (4 pcs)
- 3363 0877 11: Wiper (1 pc)
- 3363 0875 93: Seal kit (2 pcs)
- 3363 0877 09: Seal (1 pc) [from seal kit 3363 0875 93?]
- 3363 0877 10: Back-up ring (1 pc) [from seal kit 3363 0875 93?]
- 3363 0879 59: O-ring (1 pc)
- 3363 0832 45: O-ring (1 pc)
3363 0879 22: Moil point ClassicLine (26.18 in.)
3363 0875 27: Moil point ClassicLine (34.06 in.)
3363 0914 20: Moil point SilverLine (34.06 in.)
3363 0875 24: Chisel (cross) ClassicLine (26.18 in.)
3363 0875 25: Chisel (cross) ClassicLine (34.06 in.)
3363 0914 21: Chisel (cross) SilverLine (34.06 in.)
3363 0942 60: Chisel (parallel) ClassicLine (26.18 in.)
3363 0942 61: Chisel (parallel) ClassicLine (34.06 in.)
3363 0879 24: Blunt tool ClassicLine (26.18 in.)
3363 0875 28: Blunt tool ClassicLine (34.06 in.)
3363 0914 22: Blunt tool SilverLine (34.06 in.)
3363 0879 22: Moil point ClassicLine (665 mm)
3363 0875 27: Moil point ClassicLine (865 mm)
3363 0914 20: Moil point SilverLine (865 mm)
3363 0875 24: Chisel (cross) ClassicLine (665 mm)
3363 0875 25: Chisel (cross) ClassicLine (865 mm)
3363 0914 21: Chisel (cross) SilverLine (865 mm)
3363 0942 60: Chisel (parallel) ClassicLine (665 mm)
3363 0942 61: Chisel (parallel) ClassicLine (865 mm)
3363 0879 24: Blunt tool ClassicLine (665 mm)
3363 0875 28: Blunt tool ClassicLine (865 mm)
3363 0914 22: Blunt tool SilverLine (865 mm)
- 3363 0886 13: Seal bush
- 3363 0977 97: Ring
- 3363 1034 18: Seal
- 3363 0981 37: Seal
- 3363 0875 92: Seal kit (2 pcs)
- 3363 0875 78: Cylinder (with no. 601 – 603)
- 3361 0319 88: Seal
- 3362 2675 83: Seal (5 pcs)
- 3362 2675 90: Seal (8 pcs)
- 3360 3144 53: Seal
- 3363 0877 11: Wiper
- 3363 0875 73: Percussion piston
- 3360 1068 18: Lock pin
- 3363 0875 93: Seal kit (2 pcs)
- 3363 0825 93: Plug
- 3363 0832 45: O-ring
- 3363 0825 05: Valve piston
- 3363 0904 71: Percussion unit
- 3363 0860 37: Elastic pad
- 3363 0860 39: Shock absorber (2 pcs)
- 3363 0860 41: Guide plate (2 pcs)
- 3362 2652 15: Guide plate (2 pcs)
- 3362 2626 67: Guide plate (2 pcs)
- 3363 0933 85: Plate
- 3363 0875 84: Transport safety device complete
- 3360 1141 51: Allen screw (2 pcs)
- 3363 0918 72: Label transport safety device
- 3360 1032 55: Nut (2 pcs)
- 3363 0311 81: Cover (2 pcs)
- 3363 0860 17: Plug (13 pcs)
- 3363 0988 35: Plate
- 3360 1037 68: Allen screw (3 pcs)
- 3361 3337 03: Pair of lock washers (3 pcs)
- 3360 1037 50: Allen screw (8 pcs)
- 3361 8505 96: Pair of lock washers (12 pcs)
- 3363 0988 38: Plate
- 3363 1104 17: Plate
- 3363 0988 41: Plate
- 3363 1114 62: Swivel joint cover
- 3363 1116 96: Swivel joint cover
- 3360 1037 51: Allen screw (6 pcs)
- 3363 1112 96: Pair of lock washers (2 pcs)
- 3363 1119 92: Lifting eye (2 pcs)
- 3363 1104 16: Breaker box
- 3363 0671 23: Contil.ube® II
- 3363 0875 82: Connecting kit for Contil.ube® II
- 3363 0912 00: Chisel paste for ContiLube® II
- 3363 0345 67: Grease gun for cartridge ContiLube® II
- 3360 4337 74: Grease nipple
- 3363 0898 45: Service box no. II with nitrogen cylinder
- 3363 0949 40: Service box no. III without nitrogen cylinder
- 3363 0889 97: Test gauge lower wear bush
- 3363 0949 52: Inside callipers upper wear bush
- 3363 0997 91: Base plate with threaded inserts
- 3363 0873 05: Bolt kit
- 3363 1028 73: Base plate with through borings
- 3363 0945 77: Bolt kit
- 3360 4789 49: Allen key (27 mm for bolt kit)
- 3363 0905 31: Adapter kit for underwater applications
- 3363 0929 89: Piston retainer
- 3363 0879 22: Moil point ClassicLine (610 mm)
3363 0875 27: Moil point ClassicLine (810 mm)
3363 0914 20: Moil point SilverLine (810 mm)
3363 0875 24: Chisel (cross) ClassicLine (610 mm)
3363 0875 25: Chisel (cross) ClassicLine (810 mm)
3363 0914 21: Chisel (cross) SilverLine (810 mm)
3363 0942 60: Chisel (parallel) ClassicLine (610 mm)
3363 0942 61: Chisel (parallel) ClassicLine (810 mm)
3363 0879 24: Blunt tool ClassicLine (610 mm)
3363 0875 28: Blunt tool ClassicLine (810 mm)
3363 0914 22: Blunt tool SilverLine (810 mm) - Imperial:
3363 0879 22: Moil point ClassicLine (24.02 in.)
3363 0875 27: Moil point ClassicLine (31.89 in.)
3363 0914 20: Moil point SilverLine (31.89 in.)
3363 0875 24: Chisel (cross) ClassicLine (24.02 in.)
3363 0875 25: Chisel (cross) ClassicLine (31.89 in.)
3363 0914 21: Chisel (cross) SilverLine (31.89 in.)
3363 0942 60: Chisel (parallel) ClassicLine (24.02 in.)
3363 0942 61: Chisel (parallel) ClassicLine (31.89 in.)
3363 0879 24: Blunt tool ClassicLine (24.02 in.)
3363 0875 28: Blunt tool ClassicLine (31.89 in.)
3363 0914 22: Blunt tool SilverLine (31.89 in.)
- 3360 3144 53: Seal (3 pcs)
- 3360 1068 18: Lock pin
- 3363 0886 23: Retainer bar (2 pcs)
- 3363 0886 21: Bolt (2 pcs)
- 3362 2604 35: Plug (4 pcs)
- 3363 0856 97: Protective cap
- 3363 0949 98: Lower breaker part complete
- 3363 0886 15: Impact ring
- 3363 0886 17: Wear bush
- 3363 0886 47: Wear bush (steel/bronze)
- 3363 0886 21: Bolt (4 pcs)
- 3362 2604 33: Locking bush (6 pcs)
- 3363 0853 79: Threaded insert (8 pcs)
- 3363 0879 59: O-ring
- 3363 0886 31: Floating ring (steel)
- 3363 0886 41: Wear bush (bronze)
- 3363 0942 61: Chisel (parallel) ClassicLine (34.06 in.)
- 3363 0879 24: Blunt tool ClassicLine (26.18 in.)
- 3363 0875 28: Blunt tool ClassicLine (34.06 in.)
- 3363 0914 22: Blunt tool SilverLine (34.06 in.)
- 3363 0669 63: Plug
- 3361 0315 29: Threaded insert (8 pcs)
- 3363 0860 99: Plug
- 3363 0872 86: Filling valve complete
- 3360 4784 26: Threaded plug
- 3360 1751 25: O-ring
- 3363 0875 68: Tensioning bolt complete (8 pcs)
- 3363 0886 11: Tensioning bolt
- 3363 0936 49: Washer
Kits
| Part Number | Description |
|---|---|
| 3363 0875 91 | Seal kit |
| 3363 0878 07 | Plastic parts kit |
| 3363 0943 54 | Tensioning bolt kit |
| 3363 1034 10 | Lower breaker part kit (steel) |
| 3363 0943 79 | Lower breaker part kit (bronze) |
| 3363 1034 11 | Lower breaker part kit DustProtector (steel) |
| 3363 0943 80 | Lower breaker part kit DustProtector (bronze) |
| 3363 1034 87 | Expansion bolt kit |
| 3363 0898 50 | Accumulator repair kit |
Main Components & Assemblies
| Part Number | Description |
|---|---|
| 3363 0904 71 | Percussion unit |
| 3363 0875 84 | Transport safety device complete |
| 3363 0875 78 | Cylinder |
| 3363 0875 73 | Percussion piston |
| 3363 0949 98 | Lower breaker part complete |
| 3363 0872 86 | Filling valve complete |
| 3363 0875 68 | Tensioning bolt complete |
Seals & Rings
| Part Number | Description |
|---|---|
| 3363 0886 13 | Seal bush |
| 3363 1034 18 | Seal |
| 3363 0981 37 | Seal |
| 3363 0875 92 | Seal kit (2 pcs) |
| 3363 0875 93 | Seal kit (2 pcs) |
| 3363 0877 11 | Wiper |
| 3361 3290 22 | Diaphragm |
| 3360 3144 60 | O-ring |
| 3360 3143 64 | O-ring |
| 3360 3280 46 | Back-up ring |
Wear Parts & Bushings
| Part Number | Description |
|---|---|
| 3363 0886 31 | Floating ring (steel) |
| 3363 0886 41 | Wear bush (bronze) |
| 3363 0886 47 | Wear bush (steel) |
| 3363 0886 15 | Impact ring |
| 3363 0886 17 | Wear bush |
Fasteners & Hardware
| Part Number | Description |
|---|---|
| 3363 0886 11 | Tensioning bolt |
| 3363 1000 47 | Expansion bolt |
| 3363 1000 49 | Washer |
| 3361 0315 46 | Threaded insert |
| 3363 0886 21 | Bolt |
| 3363 0886 23 | Retainer bar |
| 3362 2604 35 | Plug |
| 3362 2604 33 | Locking bush |
Tools
| Part Number | Description |
|---|---|
| 3363 0879 22 | Moil point ClassicLine (665mm/26.18in) |
| 3363 0875 27 | Moil point ClassicLine (865mm/34.06in) |
| 3363 0914 20 | Moil point SilverLine (865mm/34.06in) |
| 3363 0875 24 | Chisel (cross) ClassicLine (665mm/26.18in) |
| 3363 0875 25 | Chisel (cross) ClassicLine (865mm/34.06in) |
| 3363 0914 21 | Chisel (cross) SilverLine (865mm/34.06in) |
| 3363 0942 60 | Chisel (parallel) ClassicLine (665mm/26.18in) |
| 3363 0942 61 | Chisel (parallel) ClassicLine (865mm/34.06in) |
| 3363 0879 24 | Blunt tool ClassicLine (665mm/26.18in) |
| 3363 0875 28 | Blunt tool ClassicLine (865mm/34.06in) |
| 3363 0914 22 | Blunt tool SilverLine (865mm/34.06in) |
Accessories & Supplies
| Part Number | Description |
|---|---|
| 3363 0912 00 | Chisel paste for ContiLube® II |
| 3363 0345 67 | Grease gun for cartridge ContiLube® II |
| 3360 4337 74 | Grease nipple |
| 3363 0898 45 | Service box no. II with nitrogen cylinder |
| 3363 0949 40 | Service box no. III without nitrogen cylinder |
| 3363 0889 97 | Test gauge lower wear bush |
| 3363 0949 52 | Inside callipers upper wear bush |
| 3315 0381 00 | Chisel paste |
| 3363 0943 00 | Anti-Seize 120 g |
Individual Components
| Part Number | Description |
|---|---|
| 3363 0977 97 | Ring |
| 3363 0856 97 | Protective cap |
| 3363 0879 59 | O-ring |
| 3363 0669 63 | Plug |
| 3363 0860 99 | Plug |
| 3363 0936 49 | Washer |
| 3360 3322 59 | Filling screw |
| 3361 3350 25 | Protective cap |
